MD&M South and Bibber Keynote A Success

Isometric Micro Molding icon with tweezers and micro component

MD&M South and Bibber Keynote A Success The highly anticipated MD&M South conference was a great success, with over 2,300 attendees from various advanced manufacturing and engineering professions. Held in Charlotte, NC, MD&M South will return in 2024. During this year’s event, Isometric Micro Molding CEO, Donna Bibber, gave the Keynote: Miniaturized Devices: Current and […]

Isometric News: OEM’s Seek Molders Offering Timely Techniques

Micro molded medical device with thin wall, micro features, and needle tip

Isometric News: OEM’s Seek Molders Offering Timely Techniques Medical Product Outsourcing (MPO) magazine recently featured Isometric Micro Molding Vice President, Brent Hahn, in their article, “OEM’s Seek Molders Offering Timely Techniques”. The article reveals the current state of urgency within the medical device manufacturing industry, as well as the requirements that OEM’s face to provide […]

Donna Bibber is Keynote Speaker at MD&M South

MD&M South Logo

Donna Bibber is Keynote Speaker at MD&M South MD&M South 2022 kicks off next week in Charlotte, NC (June 14-16), and Donna Bibber, Isometric Micro Molding, Inc. CEO, will deliver the keynote speech. Titled, “Miniaturized Devices: Current and Future State-of-the-Art High Volume Micro Molding” will be showcased on June 14th, at 2pm EDT, in the MedTech Theater (Booth 1638). […]

Tremendous Honor Bestowed Upon Isometric CEO

Photo of Donna Bibber, CEO, Isometric Micro Molding

Tremendous Honor Bestowed Upon Isometric CEO Isometric Micro Molding, Inc. CEO, Donna Bibber, was recently inducted into the James B. Francis Academy of Distinguished Engineers at the University of Massachusetts Lowell. The prestigious engineering program at UMass Lowell is widely recognized as a leader in research and innovation for more than a century. Selected Inductees must […]

Isometric Featured Article: “Diabetes Technology Manufacturers Seemingly on a Sugar Rush”

Picture of long term implantable micro drug delivery devices for cancer treatment, on a fingertip, by Isometric Micro Molding

Isometric Featured Article: “Diabetes Technology Manufacturers Seemingly on a Sugar Rush” Isometric Micro Molding was recently featured in a Medical Product Outsourcing (MPO) article that shared innovations in diabetes technology, market trends, and the manufacturers that support this high precision industry. As shared in the article, the latest diabetes management devices are purposely small and […]

Isometric Feature: Big Prospects for Medical Device Miniaturization

Photo of Micro Hole Needle For Diabetes Drug Delivery, shown on finger tip, by Isometric Micro Molding

Isometric Featured in Article, “Big Prospects for Medical Device Miniaturization” Medical Device and Diagnostic Industry (MD+DI Qmed) featured Isometric Micro Molding CEO, Donna Bibber, in their February article, Big Prospects for Medical Device Miniaturization. As noted in the article, Bibber was also an expert panel member for the MD&M East 2021 discussion, “Solving Today’s Challenges […]

Isometric CEO, Donna Bibber, Featured in MDO’s “Women in Medtech 2021”

Photo of Donna Bibber, CEO, Isometric Micro Molding

Isometric CEO, Donna Bibber, Featured in MDO’s “Women in Medtech 2021” Medical Design and Outsourcing (MDO) recently featured Isometric Micro Molding CEO, Donna Bibber, in their “Women in Medtech 2021” issue. Bibber’s plastics engineering background, expertise and unique problem-solving skills have earned her an outstanding reputation in the industry. Over her 33+ year micro manufacturing […]

Isometric Micro Molding Adds Additional BMF Printers for Micro 3D Printing

Blue Isometric Micro Molding logo with white letters

Isometric Micro Molding Adds Additional BMF Printers for Micro 3D Printing BMF Printers Support Isometric Customer Prototypes With Unparalleled Accuracy, Precision and Speed Isometric’s Partnership With BMF Since the fall of 2020, Isometric has turned to BMF’s micro 3D printers to round out its vertically-integrated micro molding, micro tooling, CT scanning, and micro automated assembly […]

Isometric Companies: Over 30 Years of Micro Solutions

Photo of an Isometric MIcro Molding employee in a white coat, mask, and hair net, looking at micro automate assembly equipment

Isometric Companies History Over 30 Years of Micro Solutions Our rich history begins with Founder Michael T. Hudalla, who formed Isometric Companies, Inc’s. first division, Isometric Tool & Design, Inc., in 1990.  At that time, the Isometric vision was to manufacture tooling and provide manufacturing solutions to exacting specifications for ultra-small, ultra-precise, and ultra-complex applications. […]

Isometric’s Microns Matter® PFMEA Process

Isometric Micro Molding's Micron Matter process for risk mitigation Microns Matter® Risk Mitigation Process

Isometric’s Microns Matter® PFMEA Process Figure 1.1 Isometric Micro Molding “Average” Tolerance Risk Assessment Strategy Each phase of Isometric’s Microns Matter® PFMEA process allows for the accurate estimation of percentage micron tolerance risks, which mitigates risks during each phase. Truly, components and devices with micron tolerances can only be successfully manufactured by applying years of […]

Micro Molding the Tiniest Parts On Earth

Photo of Micro 3D printed micro component for robotic surgery tools, shown on a pencil tip, by Isometric Micro Molding.

Micro Molding the Tiniest Parts On Earth Isometric’s Donna Bibber and Brent Hahn were recently interviewed by Design News about the growing trend of miniaturization and the micro molding industry. The demand is seen in many markets, from fiberoptic connectors to intraocular surgical instruments. “Our main customer base has been medical and drug delivery device […]

Donna Bibber Speaking At MD&M BIOMEDigital

MD&M BIOMEDigital conference logo

Donna Bibber Speaking At MD&M BIOMEDigital Isometric’s CEO, Donna Bibber, is a selected industry leader and speaker at MD&M’s BIOMEDigital event. Her presentation, scheduled from 11:30-12:oopm CST on April 6th, covers risk mitigation strategies that prevent micro-molding program failures. Most importantly, she’ll discuss how overcoming early technical challenges impact the reduction of costly, late-stage development […]

Micro Ophthalmic Ocular Implants

Image of micro ophthalmic ocular implant glaucoma drain for medical devices, shown on a finger tip, by Isometric Micro Molding

Micro Ophthalmic Ocular Implants Donna Bibber shares insight about micro ophthalmic ocular implants and the continued impact of micro mold manufacturing on worldwide growth in the next five years. Micro ophthalmic and intraocular implants continue to be one of the largest and fastest-growing global micro medical and pharma micro device market sectors. Driven by a […]

Today’s Micro Molding Challenges, Part 2: Tooling – The Enabler

Picture of Micro tooling machining at Isometric Micro Molding

Today’s Micro Molding Challenges, Part 2: Tooling – The Enabler Today’s Micro Molding Challenges, Part 2 pushes forward the discussion on best practices for micro molding. It is well known that micro mold and micromachining are key to the realization of micro molded components and micro automated assemblies. Both capabilities require tooling and fixtures manufactured […]

Micro Giants: Micromolding for Medtech

Image of medical grade, Class IV, intraocular pupil expander ophthalmic medical device, held by surgical tweezers, by Isometric Micro Molding

Micro Giants: Micromolding for Medtech Medical Product Outsourcing article featuring Isometric Micro Molding, Inc. Micromolding for medtech is becoming serious business. The medical industry’s demands are continually challenging suppliers and manufacturers to stretch their technical competencies into areas where they may fear to tread. Doctors and surgeons urge instruments for less invasive procedures and quicker […]

Micro Molding Innovations For Medical Devices

Picture of a bioresorbable tissue repair medical device for orthopedics, shown on a gloved finger, by Isometric Micro Molding

Micro Molding Medical Device Innovations Medical Product Outsourcing (MPO) spoke to the team at Isometric Micro Molding, Donna Bibber, Brent Hahn, and Wayne Shakal, to learn more about micro molding innovations for medical devices and the complex markets of biopharma and pharma.  The big challenges of medical device miniaturization have created crucial demands on micro […]

Thin-Walled Micro Injection Molding For Devices

Image of a thin-walled micro injection molding example, by Isometric Micro Molding

Isometric Micro Molding’s micromachining of micro molds enables thin-walled micro injection molding in thermoplastic, silicone, and metal.  To mold micro thin-wall devices, polymer selection, ultra-precision tooling, and knowledge of CFD (computational fluid dynamics) is critical. For micro molded devices to be small, compliant, comfortable, and/or flexible, they may require very wall thicknesses as thin as […]

Brent Hahn Joins Isometric Micro Molding, Inc. as New Global Director of Sales and Marketing

Picture of Brent Hahn, Isometric Micro Molding

Brent Hahn Joins Isometric Micro Molding, Inc. as New Global Director of Sales and Marketing NEW RICHMOND, WISCONSIN MAY 5, 2020Isometric Micro Molding, Inc., an industry-leading medical and drug delivery micro molding company, announced today that Brent Hahn has joined Isometric Micro Molding as Global Director of Sales & Marketing. Mr. Hahn joins the dynamic […]

Scalability of Micro-Intraocular Implants and Devices

graphic of a pupil expander and how micro intraocular implant medical devices work

Scalability of Micro-Intraocular Implants and Devices Donna Bibber discusses some of these micro-intraocular implants and devices and the scalability challenges associated with each, from the perspective of a plastics engineer. Recent developments and new-to-market intra-ocular devices and implants have led to the successful treatment of a number of ophthalmological conditions of varying seriousness and complexity […]

How to Approach Today’s Micro Moulding Challenges Part 1: Tooling-the Enabler

Picture of five-axis micro milling of micro grippers to 1 μm at Isometric Micro Molding.

How to Approach Today’s Micro Moulding Challenges Part 1: Tooling-the Enabler Challenges in micro molding have not changed much at all in the past 20–30 years. The solutions to these challenges, however, have changed significantly. The most challenging attribute for micro molding matches up with the highest risk mitigation factor—tooling. For this reason, the top […]